Most boys try not to talk about penis size because it is a painful subject for them. Some boys want to change the length of their penis, even if it is a normal size. Today it can be done in different ways without operations. For men, for example, a vacuum pump will help lengthen the penis. Before buying this device, you should know how to properly use the pump for penis enlargement.
Is it possible to enlarge the penis with a pump?
First, you need to understand whether a vacuum pump helps with an erection and whether penis enlargement is realistic, as some doubt the effectiveness of this method.
Recently, such a vacuum pump was used only to improve erection. In fact, when using a pump for the penis, blood flow increased several times, which strengthened the erection. Over time, children who improved their erections noticed that their penis grew larger after using this device. Therefore, you should not think about whether it is possible to enlarge the penis with a vacuum pump, because it has long been proven.
Many people recommend using such a device simply to change the size of the penis at home.
Due to the stimulation of constant blood circulation, epithelial tissue is constantly growing, which lengthens the penis.
It has been proven that most children who use this device regularly get good results. Just a month later, a penis enlargement pump helped her thicken by two inches. The length also increases, but much slower than the width.
How does a penis enlargement pump work?
If you use a vacuum pump regularly to enlarge the penis, blood flow to the phallus tissue will increase. Due to this, the penis lengthens and thickens. It is no secret that there is a tissue of blood vessels in the body. As blood circulation increases, these cells begin to expand gradually.
The space created by the device systematically increases blood flow and fills the sponge tissue with it. This leads to improved strength, elongation and enlargement of the skin of the penis.
Assortments
Most models of penis enlargement pumps do not differ in structure. Externally, they look like an ordinary plastic container in which a ruler is applied. Penis enlargement pumps are sold with a bulb and a special seal needed to create pressure in the bulb.
However, some models may be equipped with a drain valve, pressure gauge or a special pressure control button.
There are several types of these devices.
By hand
Many men choose to use a hand pump to increase their male dignity. This model has a special built-in piston that allows you to completely remove air from the tube. Such pumps are the cheapest and are therefore used more often than others.
Automatic
An automatic pump allows the penis to grow faster than a hand pump. Connects to a battery-powered electric pump. A person does not need to make any effort to use this model. It is enough to adjust the pressure and use a vacuum electric pump.
Living in water
Not every man uses water pumps to enlarge his penis, as these models have emerged relatively recently. In this case, water is added to the container. Such devices are more effective and have virtually no contraindications. The advantages of water models also include service life.
It is not possible to determine unambiguously which hydraulic pump is best for penis enlargement, as all of the above models have their differences.
Choice features
Before enlarging your penis with a vacuum pump, you need to understand how to choose the right device. The following recommendations should be followed when choosing:
- The length of the bulb for the penis should be 3-4 cm longer than the phallus in an upright position,
- the structure should be 2-3 cm wide around the penis during erection;
- Beginners are advised to use a device equipped with a pear-shaped oxygen pump.
- The penis enlargement pump must be made of a reliable material that can provide complete sealing.
You should also consider the price of the purchased device. If there is no financial limit, you can buy an automatic model immediately.
How to make a pump with your own hands
If you want, you can make a pump for the penis with your own hands. A home-made pump for men should consist of the following elements:
- Glass. The element is designed to accommodate the penis.
- Pump. A binding element used to inject oxygen.
- A pipe. In many models, it is used to connect a pump to a balloon. But sometimes you can find tubeless models. In this case, the structure is monolithic and the pump is attached directly to the balloon itself without the use of auxiliary elements.
To increase the capacity of such a device independently, you must follow the following instructions:
- It is advisable to use a balloon to create a balloon. First, a special hole is made in which the penis will be inserted. Nicks should not be and therefore make sure they are perfectly straight.
- After completing the first hole, you must move on to the other. It should be perpendicular to the walls. This hole is designed for the installation of pipes to be connected to the pump. The width of the hole is determined by the size of the hose to be closed.
- A pipe is connected to the hole. It is recommended to use a hose with high density and thick walls. A hose made of a very thin material prevents air from bending, which can adversely affect the operation of the device.
- A paper funnel should be placed under the cylinder to be used to apply mastic in the future. The thickness of the funnel should be equal to the width of the erect penis.
- When the sealant is completely dry, you can start closing the pump. To do this, you can use a small aquarium pump or an ordinary rubber bulb.
This device is enough to understand that the pump enlarges the penis. However, it is still advisable to purchase high quality vacuum pumps for higher efficiency.
How to use a penis enlargement pump
Not every man knows how to use a penis extension pump. For proper use of the vacuum pump for men, you need instructions that will explain the features of the use of this device.
Before using the penis enlargement device, I lubricate the plastic container with a little lubricant. In doing so, I use only non-greasy lubricants to avoid accidentally damaging the glass. When the lamp is completely lubricated, the penis can be placed inside. At the same time it should be placed firmly on the walls. After that, the air begins to draw in, which causes the blood flow to gradually increase.
When the penis is stretched with a pump, it is necessary to straighten the balloon with one hand and remove oxygen using the pear with the other hand. You also need to completely cover the hole in the balloon, which helps to create a complete seal. After a few minutes you can see a strong redness of the enlarged penis.
Redness indicates that further increase in erection can be harmful, and therefore air should be allowed to enter the balloon.
The procedure should be repeated when the erection is slightly weakened. The duration of use of the device is 20-30 minutes. This device should be used every 2-3 days to treat impotence. However, it is recommended to use the pump daily in the first week, especially before sexual intercourse. Indeed, for some men, it is important to increase the length of the penis immediately before sexual intercourse. When lengthening the penis, a special erection ring can be used after the pump. It is attached to the base of the penis and prevents the erection from disappearing quickly.
Contraindications
Before enlarging your penis with a pump, you should be familiar with the main contraindications. Penis extension should not be used in this device:
- People with infectious urethritis and inflammation,
- men with thrombosis.
Therefore, it is recommended to consult an andrologist to perform all the necessary tests and conclude that the penis should be enlarged with a pump.
The result
Many boys think that you can enlarge your penis with a pump. To understand this, you need to get acquainted with the working principle of this device and communicate with the people who use it.